Search
Search Criteria
Products meeting the search criteria
Motherboard Type: M-ATX/ITXProduct Materials: Hardware 0.6mm SPCC + Panel ABS + Tempered GlassProduct Size: 375(L)*205(W)*427(H)mmTop Panel: USB3.0*1;USB2.0*2;Microphone*1;Headset*1;POWER Button RESETDetailed Configuration: 3.5 Hard Disk*2PCS 2.5 Solid State Disk*3PCSRadiator Height Limit: 170mmDisplay Card Length Limit: 260mmSupporting Fans: Front Fan: 120mm*3/140mm*2;Top:120mm*2;Rear:120mm*1Supporting Water Cooling: Front Water Cooling:120mm/240mm;Rear:120mm;Top: 120mm/240mm..
4,600৳ 5,200৳
Ex Tax:4,600৳
Six Fixed Lighting RGB Fans Pre-InstalledSide Swivel Tempered GlassVersatile Cooling OptionsFlexible Component SupportDrive Bays: 2.5" SSD*2 | 3.5"HDD or 2.5" SSD*2Clearance: PSU Length~160mmCPU Cooler Height~160mm VGA Card Length~305mmMotherboard Support : ATX | Micro - ATX | Mini-ITXUnmatched Price per PerformanceThe Montech X3 is not just any PC Gaming case, it's an upgrade in every aspect compared to past X series cases. The X3 delivers the best Price per Performance ratio Montech has to offer!High Airflow The Montech X3's triple front 140mm fans provides massive air intake, and with pre-mounted top and rear ventilation, optimizing the airflow system. RGB Lighting ShowAll six pre-installed fans are fixed RGB lighting capable, you can turn the fan lighting on or off by simply pressing the LED button.Note: The lighting is fixed, not addressable, but can be turned turn off.Full Panoramic ViewThe Montech X3 features a full Panoramic Tempered Glass side panel, so you can easily showoff your battle system and RGB lighting.More Convenient, More SafeThe unique Side Swivel Tempered Glass Side Panel design is not only easier for users to unmount, the zero drill-hole design drastically improves the panel's strength integrity and safety.Montech X3 MESH RGB Lighting Mid-Tower ATX Gaming CaseMontech X3 MESH RGB Gaming Case comes with triple front 140mm fans provides massive air intake, and with pre-mounted top and rear ventilation, optimizing the airflow system. This gaming case featured with Six Fixed Lighting, RGB Fans Pre-Installed, Side Swivel Tempered Glass, Versatile Cooling Options and Flexible Component Support. In this gaming case, All six pre-installed fans are fixed RGB lighting capable. The Montech X3 designed with a full Panoramic Tempered Glass side panel. In this gaming casing, the unique Side Swivel Tempered Glass Side Panel design, zero drill-hole design drastically improves the panel's strength integrity and safety.This X3 MESH RGB gaming case supports with ATX, Micro ATX, Mini ITX motherboards. The Montech X3 MESH RGB Gaming Case has no warranty...
5,300৳ 5,500৳
Ex Tax:5,300৳
Tempered Glass Side Panel, Rainbow AutoFlow FanMotherboard Support: ATX, Micro ATX, Mini ITXFine Mesh Front Panel, Dust Filters: Top, BottomPre-Installed 3 Fans, High AirflowTrue Classic Is Never Out of StyleThe X2 Mesh's design is inspired from the iconic Apple iPhone4, with the mesh and front frame in perfect proportion.Tempered Glass Side PanelFull transparent tempered glass side panel that can showcase your build.AutoFlow Rainbow FanThree Pre-installed rainbow LED fans, 140mm fans *2 at the front and 1x 120mm fan at rear. Note: Fans are fixed light and not controllable.High AirflowThe fine mesh front panel along with two strong 140mm fans provide massive air intake.Montech X2 MESH Black Mid-Tower ATX Gaming CaseMontech X2 MESH is Mid-Tower ATX Gaming Case that comes with a Fully clear tempered glass side panel. This Gaming case has three pre-installed rainbows LED fans, 2 x 140mm fans at the front, and 1 x 120mm fan at the rear. This Gaming case featured Expansion Slots: 7, Dust Filters: Top, Bottom, Power Supply Support: Bottom mount, ATX. It has USB2.0 x 2, USB3.0 x 1, Audio x 1, Mic x 1 I/O ports. Montech X2 MESH Gaming Casing has a Full transparent tempered glass side panel. The fine mesh front panel along with two strong 140mm fans provides massive air intake.This X2 MESH case is compatible with ATX, Micro ATX, Mini ITX motherboards. The new Montech X2 MESH Black Gaming Case has no warranty...
3,950৳ 4,400৳
Ex Tax:3,950৳
Motherboard Support: ATX, Micro ATX, Mini ITX4 Rainbow Led Fans pre-installedFull Tempered Glass Side PanelHigh Airflow, Excellent Dust ResistanceMontech "M" Structured Front PanelTaking from our brand's first letter "M", the front panel provides an exquisite look. High Airflow Front panel mesh design along with top and bottom ventilation and rear exhaust, allowing great airflow.Pre-Installed 4 Rainbow FansFour pre-installed rainbow fans provide high airflow, also lighting up your system.Excellent Dust ResistanceThe top magnetic dust filter makes it easier to remove and cleanI/O DesignThe I/O is at the top, does not have any connecting wires with the front panel thus can be easily removed and cleaned.Full Glass Side PanelAllows gamers to showcase their PC build perfectly.Versatile Cooling OptionsFan Support Top 120mm*2 Front 120mm*3 Rear 120mm*1Radiator Support Front 120/240mm Rear 120mmMotherboard Support ATX Micro - ATX Mini-ITXDrive Bays 3.5" HDD*2 2.5" SSD*2Clearance PSU~160mm CPU~160mm VGA~320mm..
3,650৳ 4,000৳
Ex Tax:3,650৳
Gamdias ATHENA M6 WH RGB Mid Tower Gaming CaseThe Gamdias ATHENA M6 LITE presents itself as a compelling mid-tower ATX gaming case that effortlessly combines fashion and practicality, making it a standout choice for discerning gamers. Designed with a focus on both performance and style, this case is sure to catch the eye. One notable feature is its motherboard sync functionality, allowing seamless adjustment of the RGB lighting on the case to synchronize with the rest of your build. The triple-sided underflow adds to its aesthetic appeal, creating a captivating lighting effect that enhances the overall beauty of the casing.Equipped with four integrated 120mm ARGB fans, this case not only ensures effective cooling but also contributes to its visually striking appearance. The smooth tempered glass window provides a fantastic showcase for your build, allowing you to display your components with pride. Moreover, the mesh front panel and perforated chassis facilitate optimal airflow, aiding in keeping your system running cool and efficiently.The inclusion of a magnetic dust filter is a practical and convenient feature, ensuring that your components stay clean and function smoothly over time. This attention to detail reflects Gamdias' commitment to providing a high-quality case that meets the needs of gamers.In summary, the Gamdias ATHENA M6 LITE stands as an excellent choice for gamers seeking a top-tier case that not only performs exceptionally but also boasts an attractive design. Its blend of style, functionality, and attention to detail make it a compelling option for those who prioritize both aesthetics and performance in their gaming setup.Unrestrictive BrillianceThe Gamdias ATHENA M6 LITE Mid-Tower ATX Gaming Casing with a unique lighting profile focused on optimizing airflow performance. The case features a panoramic mesh front panel, four built-in 120mm ARGB fans, and triple-sided ARGB light strips to leverage airflow performance and create ambient underglow lighting effects.Extensive Mesh PanelThe Gamdias ATHENA M6 LITE Mid-Tower ATX Gaming Casing with a pillar-shaped mesh front panel with room for three 120mm RGB fans, implemented with all-around perforated ventilation. The case is designed to create an environment with unrestrictive airflow to meet next-generation cooling demands.Heightened AirflowThe lower compartment of the chassis takes on a perforated design with the elevated case stands allowing massive air intake and exhaust on all sides of the case.3+1 ARGB FansThe Gamdias ATHENA M6 LITE Mid-Tower ATX Gaming Casing is preinstalled with four high-performance hydraulic ARGB fans to create a synchronized setup while enhancing air intake and exhaust.Simple and AccessibleThe I/O is equipped at the top front of the case, featuring a 2x USB port, 1x USB 3.0 port, LED lighting controls, and additional audio connectivity.Brilliant and ConciseThe Gamdias ATHENA M6 LITE Mid-Tower ATX Gaming Casing focuses on high airflow and ARGB appearance with a mesh front panel, 4 ARGB fans, and triple under low light strips. It also comes with dust filters on the top and bottom of the case to clean out dust easier than ever...
6,750৳ 6,800৳
Ex Tax:6,750৳
Gamdias ATHENA M6 Elite RGB Mid Tower Gaming CaseThe Gamdias ATHENA M6 LITE presents itself as a compelling mid-tower ATX gaming case that effortlessly combines fashion and practicality, making it a standout choice for discerning gamers. Designed with a focus on both performance and style, this case is sure to catch the eye. One notable feature is its motherboard sync functionality, allowing seamless adjustment of the RGB lighting on the case to synchronize with the rest of your build. The triple-sided underflow adds to its aesthetic appeal, creating a captivating lighting effect that enhances the overall beauty of the casing.Equipped with four integrated 120mm ARGB fans, this case not only ensures effective cooling but also contributes to its visually striking appearance. The smooth tempered glass window provides a fantastic showcase for your build, allowing you to display your components with pride. Moreover, the mesh front panel and perforated chassis facilitate optimal airflow, aiding in keeping your system running cool and efficiently.The inclusion of a magnetic dust filter is a practical and convenient feature, ensuring that your components stay clean and function smoothly over time. This attention to detail reflects Gamdias' commitment to providing a high-quality case that meets the needs of gamers.In summary, the Gamdias ATHENA M6 LITE stands as an excellent choice for gamers seeking a top-tier case that not only performs exceptionally but also boasts an attractive design. Its blend of style, functionality, and attention to detail make it a compelling option for those who prioritize both aesthetics and performance in their gaming setup.Unrestrictive BrillianceThe Gamdias ATHENA M6 LITE Mid-Tower ATX Gaming Casing with a unique lighting profile focused on optimizing airflow performance. The case features a panoramic mesh front panel, four built-in 120mm ARGB fans, and triple-sided ARGB light strips to leverage airflow performance and create ambient underglow lighting effects.Extensive Mesh PanelThe Gamdias ATHENA M6 LITE Mid-Tower ATX Gaming Casing with a pillar-shaped mesh front panel with room for three 120mm RGB fans, implemented with all-around perforated ventilation. The case is designed to create an environment with unrestrictive airflow to meet next-generation cooling demands.Heightened AirflowThe lower compartment of the chassis takes on a perforated design with the elevated case stands allowing massive air intake and exhaust on all sides of the case.3+1 ARGB FansThe Gamdias ATHENA M6 LITE Mid-Tower ATX Gaming Casing is preinstalled with four high-performance hydraulic ARGB fans to create a synchronized setup while enhancing air intake and exhaust.Simple and AccessibleThe I/O is equipped at the top front of the case, featuring a 2x USB port, 1x USB 3.0 port, LED lighting controls, and additional audio connectivity.Brilliant and ConciseThe Gamdias ATHENA M6 LITE Mid-Tower ATX Gaming Casing focuses on high airflow and ARGB appearance with a mesh front panel, 4 ARGB fans, and triple under low light strips. It also comes with dust filters on the top and bottom of the case to clean out dust easier than ever...
5,650৳ 5,700৳
Ex Tax:5,650৳
Sync with Motherboard3 Built-in 120mm trio rings ARGB fansSeamless Tempered Glass WindowMesh Front PanelI/O front panel with Rainbow color Streaming LightingThe spacious interior fits all standard motherboardsPower Supply Cover DesignMagnetic Dust FilterA mid-tower case with asymmetrical mesh design is the signature of an ATHENA pc case, the M1 ELITE also features 3 built-in trio-rings ARGB fans, ARGB rimmed I/O port and a spacious design to fit all standard motherboards.CONTROL AND SYNCHRONIZEThe ATHENA M1 supports system-wide ARGB to compatible motherboards with lighting synchronization that controls the ARGB fans and ARGB rimmed I/O port with a single push of a button.ELITE EXPANSIONThe ELITE version is able to support up to three 120mm or two 140mm fans upfront. Multiple mounting points for 360/280mm radiators up front, 280mm, 240mm, and a 120/140mm radiator at the rear.SEAMLESSLY CLEANThe magnetic dust filter located on the top and the seamless tempered glass window on the side held together by thumbscrews give you an easier time to clean and display the internal components.Unique and FunctionalAdopting a detachable asymmetry mesh and three built-in 120mm trio rings ARGB fans, ATHENA M1 Elite provides not only an unique look but also maximum air flow through the case.Sparkling EverywhereTo satisfy PC builders' and gamers' crave for more RGB, each I/O port is surrounded by neo chrome streaming lights, with more than 20 lighting effects.One Click, Sync AllATHENA M1 Elite supports connection to compatible motherboards (5v 3-pin) to achieve system-wide RGB lighting synchronization, makes you easier to unite your case from chaos to calm.Power Supply Cover DesignBuilding upon inner beauty of the case, a vented power supply shroud at the bottom of the case surrounds the PSU with cutouts displaying the side of the PSU.Magnetic Dust FilterA magnetically held dust filter, located on top of the ATHENA M1 Elite to minimize dust entering the case. With magnets holding the filter to the case, makes it easy to remove and clean the washable dust filter.Seamless Tempered GlassTo build a minimalistic style, the side tempered glass is inserted from the back of case, leaving thumb screws to hold the tempered glass in place. A cleaner design displaying the internal components of the PC.Light It Up, Speed It UpA single easy push button, controls the 3 ARGB fans and lights surrounded by I/O port, cycling though the different effects and LED off. Another button controls the fans; high, mid, and low speeds, whichever suites your cooling needs.Improved Cable ManagementTo achieve the best PC building experience the ATHENA M1 Elite has an enlarged cable management compartment behind the mainboard plate. Tuck away all your excess cables for an extra clean system and improved case airflow.Ample AccommodationThe accommodation inside ATHENA M1 Elite is able to support up to three 120mm or 140mm fans up front. Multiple mounting points for 360/280mm radiators upfront, 280/240mm and a 120mm radiator at the rear."Beauty and Intelligence"ATHENA M1 is a mid-tower case with asymmetry mesh front panel and three built-in 120mm trio rings ARGB fans on the front. With this design, the pursuit of high heat dissipation, increase air flow, and eye catching design is achieved.Asymmetry Mesh Design3 Built-in 120mm Trio Rings ARGB FansI/O Front Panel With ARGB Streaming LightingARGB Sync Via MotherboardPower Cover DesignMagnetic Dust FilterSeamless Tempered Glass WindowOne Touch to Easily Switch RGB Streaming Lighting Style, and LED offSelectable High/Mid/Low Fan Speed ..
6,650৳ 6,700৳
Ex Tax:6,650৳
Pre-installed: 3×120mm ADD-RGB fans (CF120) at front.Black, Mid Tower, ABS+SPCC+Tempered GlassMotherboard : E-ATX, ATX, Micro-ATX, Mini-ITX SupportTempered-Glass Side and Front Panels7, 3.5"/2.5" Drive Bays - 2, 2.5" Drive Bays - 2+2, ATX PS2 (maximum length: 170mm)1×USB3.0/2×USB2.0/1×Audio(HD)/1×Mic,1×RGB Button7 Expansion SlotsLiquid Cooling SupportAs a mid-tower case, MATREXX 55 V3 ADD-RGB 3F is endowed with abundant space that supports up to E-ATX motherboard. With two large air intakes and an air exhaust, optimized airflow is guaranteed to keep your components cool. MATREXX 55 V3 ADD-RGB 3F provides you with great building and using experiencesMATREXX 55 V3 ADD-RGB 3F3pcs of 120mm Addressable (ADD) RGB fans (CF120) and an ADD RGB strip are pre-installed at the front to give your gaming ambience a boost.The lighting system includes 5 pre-programmed lighting effects (dynamic color, static, breathing, comet and fashion collision) and can be easily controlled by the RGB button on the I/O panel or motherboards with addressable RGB sync function.Dual 4mm Tempered GlassFull sized 4mm thickness, tempered glass side panel and a front panel give the case a unique look to perfectly show off your inner structureMassive Cooling CompatibilityOptimized airflow is guaranteed with large air intakes on two sides of the front panel and an air exhaust in the back and on top, to keep your components coolSupports the installation of Liquid Cooler :1120/140/240mm radiator liquid cooling system on the top120mm radiator liquid cooling system in the rear120/140/240/280/360mm radiator liquid cooling system in the frontSupports the installation of Cooling Fans :2×120/2×140mm fan on the top1×120mm fan in the rear3×120mm or 3×140mm fan in the frontPSU Shroud AddedThe ADD-RGB version is equipped with a PSU Shroud to hide the cables and to keep the system neat and tidyEasy Cable ManagementCable managing is now easy with a 210mm wide tower compartment (23mm clearance)Supports Motherboards up to E-ATXPower Supply: ATX PS2 (Length less than 170mm)Supports 370mm (max) Graphic card installationThe large area of air-intake at two sides of the front panel ensures sufficient airflow for the systemsThe magnet-mounted dust filter provided at the top panel, offers users easy removal and cleaning1×USB3.0/2×USB2.0/Audio/Mic/RGB Button/ PowerLED Addressable RGB..
7,300৳ 8,100৳
Ex Tax:7,300৳
Model : MATREXX 50 ADD-RGB 4FMotherboard : Mini-ITX/Micro-ATX/ATX/E-ATXCase Type : Middle TowerMaterials : ABS+SPCC+Tempered GlassWeight: 8.5 KgProduct Dimensions : 442X210X479mmIncluded Components : Case and 4 x 120 mm FanAs a mid-tower case, MATREXX 50 ADD-RGB 4F is endowed with abundant space that supports up to E-ATX motherboard. With two large air intakes and an air exhaust, optimized airflow is guaranteed to keep your components cool. MATREXX 50 ADD-RGB 4F provides you with great building and using experiencesTempered glass side-panel and the front panel. Support installation of 120/140/240/280/360mm radiator in the front:120/140/240/280mm radiator on the top,120mm radiator in the rear. 210mm wide tower compartment with 24mm clearance for cable management. Supporting 168mm (max) CPU cooler height. Support 370mm (MAX) long Graphics Card installation. Magnetic dust-proof net on top, dust-filter in front, and bottom. Two large areas of air-intake on both sides of the front panel to ensure extreme cooling. Pre-installed 4pcs of 120mm ADD-RGB fans and easily controlled by manual button (reset button)or motherboard sync.More About this DEEPCOOL MATREXX 50 ADD-RGB 4F MID TOWER GAMING CASEPower Supply Mounted BottomMotherboard Compatibility Micro ATX / ATX / Mini ITX / E-ATX Expansion Slots 7Internal 3.5" Drive Bays: 2 Internal 2.5" Drive Bays 4Front: 3 x 120mm / 3 x 140mm fan Top: 2 x 120mm / 2 x 140mm fan Rear: 1 x 120mm fan ( 4 x 120mm ADD-RGB fan Pre-installed ) Front: 120/140/240/280/360mm radiator Top: 120/140/240/280mm radiator Rear: 120mm radiatorLED Addressable RGB..
5,899৳ 6,200৳
Ex Tax:5,899৳
Black, Mid-Tower, 400mm×215mm×431mm(L×W×H), ABS+SPCC+Tempered GlassI/O Ports : USB3.0×1、USB2.0×1、Audio×1Pre-installed Fans: Rear: 1×120mm LED fan; Front:120mm×2 LED fan;Optional Fan: Front: 120mm×3/140mm×2 Top: 120mm×2/140mm×2Liquid Cooler Compatibility : Front: 120/140/240/280; TOP: 120/140/240/280 Rear: 120Expansion Slots: 4 3.5" Drive Bays x 2 , 2.5" Drive Bays x 2,CPU Cooler Height Limit 165mmVGA Length Limit 320mmUSB3.0×1, USB2.0×1, Audio×1 Matrexx 40 3FSESSENTIAL MICRO-ATXThe MATREXX 40 3FS Micro-ATX case packs massive value in a tiny chassis with impressive cooling support for max airflow, three tri-cooler LED fans and a solid tempered glass panel.SUBSTANTIAL COOLING CAPABILITYWith support for up to six 120mm or four 140mm cooling fans and also radiators up to 280mm installed on top or in front, the MATREXX 40 3FS provides ample cooling configurations.THREE TRI-COLOR LED FANSThree 120mm fans come pre-installed in the MATREXX 40 3FS with two at front and one at back. The fans are lit up with a preset tri-color LED combination, simply plug in the power and enjoy the visual experience.BETTER AIRFLOWThe front and top mesh panels provide optimal ventilation to move large amounts of air throughout the case.TEMPERED GLASS SIDE PANELUpgrade the quality of your build with a clean edge-to-edge tempered glass panel...
4,350৳ 4,500৳
Ex Tax:4,350৳
Brand : AptechModel : Aptech AP-192-15Mainboard Type: ATXCooling Fan : 2X RGB Fans..
3,450৳ 3,500৳
Ex Tax:3,450৳
Fits Mini-ITX, Micro-ATX and ATX motherboardsBuilt-in 120mm*1 Front ARGB FanSync with 5V ARGB MotherboardUnique Front Panel with Mesh WindowMagnetic Dust FilterOne Touch to Easily Switch RGB Streaming Lighting StyleThe ATHENA E1 ELITE is one of the most economically competitive mid-tower mesh case. A unique and modish front panel with a mesh design for high heat dissipation along with a built-in 120mm ARGB fan, magnetic dust filter, and seamless tempered glass window.DISTINCTIVE AIRFLOWThe unique 3D front panel with an asymmetrical mesh window attached along with an open interior provides natural airflow and cooling.ELITE EXPANSIONThe ELITE version is able to support up to three 120mm or 140mm fans upfront. Multiple mounting points for 360/280mm radiators up front, 280mm, 240mm, and a 120mm radiator at the rear.ONE CLICK. SYNC ALLATHENA E1 ELITE supports ARGB connection to compatible motherboards in order to achieve system-wide lighting synchronization, making it easier to unite the case from chaos to calm.The ATHENA E1 PC Case pertains to a few solid feature for its compact and aesthetically-pleasing design: A Small Form Factor (SFF) Case to minimize the use of unnecessary extra workspace, an eye-catching chromatic effect to light your battle-station up, increased airflow efficiency for heat dissipation, alongside of a panoramic tempered glass side panel that gives the Goddess of Wisdom a finishing touch to her battle armor. When combined altogether as one, the four exceptional elements provide an unique aura and style of its own to your gaming masterpiece...
3,250৳ 3,750৳
Ex Tax:3,250৳
4 A-RGB fans included, with convenient control.4mm Thick Tempered GlassMassive Cooling Compatibility210mm wide tower compartmentThe top has air holes at the top for smooth air flow, and the built-in dust filter is easy to attach and detach by magnetThe metal side panels on the right are joined by two clasps at the front and clasps at the backThe air hole in the power supply unit is equipped with a dust filter to prevent dust from entering. Since it is not a slide type, the case must be laid down for removalThe cooling fan can be equipped with a total of six front three, two top and one rear, and three front and one rear are standardI/O Panel : USB 2.0 Type-A x 2, USB 3.2 Gen 1 Type-A x 1, HD Audio, RGB Control Button, Pwer Button4mm Thick Tempered GlassThe Deepcool MATREXX 55 MESH ADD RGB 4F comes with Full-sized 4mm thick, tempered glass side panel that gives the case a unique look to your PC.Massive Cooling CompatibilityIn this Gaming case, Optimized airflow is guaranteed with large air intakes on both sides of the front panel and an air exhaust in the back and on top, to keep your components coolADD-RGB Lighting System and Control systemThis gaming case comes with 4 ADD-RGB fans are included in the system, as well as 2 control approaches. The gaming case has connected fans to case-control module, and power up with PSU SATA cable, then control with RGB button. You can connect fans to the motherboard header and use software to control, but when using motherboard control, disconnect PSU SATA cable.The Matrexx 55 Mesh version gaming casing is equipped with a PSU Shroud to hide the cables and to keep the system neat and tidy. This latest Deepcool MATREXX 55 MESH ADD RGB 4F Gaming Casing has no warranty..
6,500৳ 7,000৳
Ex Tax:6,500৳
Showing 1 to 13 of 13 (1 Pages)