Search
Search Criteria
Products meeting the search criteria
Thermaltake Versa J23 Tempered Glass Edition ATX Mid Tower CaseIntroducing the new Versa J23 tempered glass chassis, designed to give first time builders a premium experience out of the box. The special RGB edition of the J23 comes with 1 built-in 120mm 12V RGB rear fan that is dual-mode controllable either via the I/O port RGB button or the synchronization with enthusiasts’ favorite RGB capable motherboard brands, including Asus, Gigabyte, MSI, ASRock, and Biostar. The J23 also features a full-width tempered glass panel on the left side, an acrylic front panel to showcase your fans and lighting modes, as well as a handy power supply cover to keep your system looking neat and tidy. LIGHT UP THE SYSTEM - 1 pre-installed 120mm 1 black fan at backBUILT-IN DUAL-MODE 12V SYNC CONTROLLER - Control light via I/O Port RGB Light Button (16 LED modes/7 color) or via 12V header RGB sync motherboard (Sync with ASUS, Gigabyte, MSI, ASRock, and Biostar 12V Header Mobo)16 LED MODES THROUGH I/O PORT RGB LIGHT BUTTON - RGB Mode, Single Color Mode (7 Colors), Breath Mode (7 Colors), Light Off [7 Colors: Red, Yellow, Green, Cyan, Blue, White, Purple]CLEAR VIEW OF PC GAMING - 4mm thick tempered glass side panel with standard mountingBUILT-IN PSU COVER - Cover all your cables for a Professional Look combined with a window to show off your Colorful powerDRIVE BAYS: 2 x Accessible 2.5" + 2 x 2.5" with HDD Bracket + 2 x 3.5"/2.5" with HDD TraySupports Mini ITX, Micro ATX, and ATX MotherboardBuilt-in RGB Switch BoardThanks to the built-in RGB switch board, Versa J23 TG RGB is able to deliver the ultimate RGB lighting customization through the I/O port RGB button or the synchronization with ASUS Aura Sync, GIGABYTE RGB Fusion and MSI Mystic Light Sync-enabled motherboards.Built-in PSU CoverWith a built-in power supply cover, the J23 features plenty of ventilation to keep your power supply cool while also hiding away all those cables.Tempered Glass WindowThe Versa J23 comes equipped with a full sized 4mm thick tempered glass panel which is held on with thumbscrews in each corner. Our tempered glass panels are made to be durable and show less wear and tear than traditional acrylic panels – making this the best way to show off your system!Tool-Free InstallationForget fiddly drive bays and running out of space where you need it. The Versa J23 features totally tool-less drive bays that are interchangeable between above and below the power supply cover, as well as behind the motherboard tray for a total of seven expansion slots3.5” or 2.5” HDD Drive CompatibleSuperior Hardware SupportDon’t compromise on hardware, the J23 can fit a tower CPU cooler with maximum height 160mm, and dual expansion slots for VGA up to 310mm in length, and a power supply with length of up to 170mm.Excellent Cooling CapabilityThe Versa J23 comes with one 120mm fan preinstalled in the rear, as well as three 120mm 12V RGB fans in the front with space for two more 140mm fans at the top. The front and top panels also feature mesh cutouts to keep airflow as high as possible, and helping hardware stay cool.Modern, Sleek StylingThe J23 is designed to draw all the focus onto your internal system. The acrylic front panel lets light pour out from your fans, while the ventilated top and tempered glass side panels put your hardware on display.Handy I/O PortsThe top-front panel features two USB 3.0 data ports as well as audio passthrough and RGB lighting control switch.Thermaltake Versa J23 TG RGB, Case Type – Mid Tower, Supported Mainboard Type – ATX, Micro-ATX, Mini-ITX, Front USB port – 1 x USB3.0, 2 x USB2.0, Front Audio Port – 1 x HD Audio, 3.5 – 2, 2.5 – 2, Cooling Fan (Built-In) – 4, Cooling Fan (Optional) – 2, Radiator Support Front/Top/Rear – Front: 1 x 240mm, 1 x 280mm, Top: 1 x 240mm, Rear: 1 x 120mm, Power Supply – Standard PS2 PSU (optional), Expansion Slots – 7, VGA Card Compatibility (Maximum) – 310mm, CPU cooler height – 160mm, Transparent Side Window – Yes, Body Color – Black, Body Dimensions (H x W x D) – 447 x 205 x 455mm, Weight – 7.4Kg, Others – PSU length limitation: 170mm, Side Panel: 4mm Tempered Glass x 1, Material: SPCC, Specialty – designed to give first time builders a premium experience out of the box, The special RGB edition of the J23 can be used with 3 built-in 120mm RGB front fans that are dual-mode controllable either via the I/O port RGB button or the synchronization with enthusiasts favorite RGB capable motherboard brands...
4,650৳ 4,900৳
Ex Tax:4,650৳
Montech SKY TWO White ATX Mid-Tower CasingThe Montech SKY TWO White ATX Mid-Tower Casing is the second generation of the SKY series which is part of the high-end product range in the MONTECH family. SKY TWO has a brand-new configuration to match the goal of this series. Each aspect and the raw material is precisely picked to create a sumptuous experience for our users of our high-end product. The integrated front and side panels, the fine mesh that covers the entire bottom of the tower, and the high-efficiency pre-installed fans combine the usefulness and elegance that match up to our core value of design, while also satisfying all of the user's desires, whether for performance or appearance.4 High-Performance ARGB PWM FansThe Montech SKY TWO White Mid-Tower Casing incorporates RX120 ARGB PWM with the reversed fan blade particularly created for air intake from the side position and the PSU shroud without losing aesthetics. The enlarged drillings that cover the underside of the front panel to the PSU chamber increase airflow intake, and the inverted fans on the PSU chamber can efficiently suck air in to cool off the GPU.Next Gen High-End SupportedThe Montech SKY TWO White Mid-Tower Casing can handle GPUs with lengths up to 400mm, CPU cooler height support up to 168mm, 210mm high wattage PSU, and abundant room for assembly.Transformative Airflow DirectionThe Montech SKY TWO White Mid-Tower Casing incorporates an entirely new airflow design. Two pre-installed fans with reversed fan blades for air intake on the side panel and an exhaust fan on the rear, as well as another reversed fan on the PSU chamber that directly cools the GPU. MONTECH eventually designed a new airflow system to optimize airflow after years of testing.Enjoy the Unobstructed ViewsThanks to the integrated front and side panels, users can see their whole interior at first sight. The fine mesh that covers the underside of the front panel extends to the PSU chamber with pre-installed ARGB fans that enhance the beauty of this masterpiece.Unimpeded Light ShowThe AX120 and RX120 fans feature up to 21 lighting effects. Simply push the LED button to swap between effects or sync with the motherboard to design your lighting effect style to enjoy the spectacular light party.Perfect Cable ManagementThe Montech SKY TWO White Mid-Tower Casing incorporates a novel cable management design with a unique cable channel and three Velcro strips that make administration easier than ever throughout the building process, resulting in a clean-looking PC.Comprehensive Dust-Resistant DesignThe tailor-made dust-resistant top panel may be simply cleaned by removing the top panel. Removable dust filters are also installed on the input region adjacent to the motherboard and on the bottom to provide complete dust protection. The arrangement results in a pleasant user experience and a visually appealing PC.Easy Top 360 RadiatorThe Montech SKY TWO White Mid-Tower Casing Users may easily install an AIO liquid cooler on the top owing to the offset arrangement, which is meant to eliminate interference from other components like the motherboard and RAM...
10,200৳ 10,000৳
Ex Tax:10,200৳
Montech SKY TWO Blue ATX Mid-Tower CasingThe Montech SKY TWO Mid-Tower Casing is the second generation of the SKY series which is part of the high-end product range in the MONTECH family. SKY TWO has a brand-new configuration to match the goal of this series. Each aspect and the raw material is precisely picked to create a sumptuous experience for our users of our high-end product. The integrated front and side panels, the fine mesh that covers the entire bottom of the tower, and the high-efficiency pre-installed fans combine the usefulness and elegance that match up to our core value of design, while also satisfying all of the user's desires, whether for performance or appearance.Enjoy the Unobstructed ViewsThanks to the integrated front and side panels, users can see their whole interior at first sight. The fine mesh that covers the underside of the front panel extends to the PSU chamber with pre-installed ARGB fans that enhance the beauty of this masterpiece.Next Gen High-End SupportedThe Montech SKY TWO Mid-Tower Casing can handle GPUs with lengths up to 400mm, CPU cooler height support up to 168mm, 210mm high wattage PSU, and abundant room for assembly.Transformative Airflow DirectionThe Montech SKY TWO Mid-Tower Casing incorporates an entirely new airflow design. Two pre-installed fans with reversed fan blades for air intake on the side panel and an exhaust fan on the rear, as well as another reversed fan on the PSU chamber that directly cools the GPU. MONTECH eventually designed a new airflow system to optimize airflow after years of testing.4 High-Performance ARGB PWM FansThe Montech SKY TWO Mid-Tower Casing incorporates RX120 ARGB PWM with the reversed fan blade particularly created for air intake from the side position and the PSU shroud without losing aesthetics. The enlarged drillings that cover the underside of the front panel to the PSU chamber increase airflow intake, and the inverted fans on the PSU chamber can efficiently suck air in to cool off the GPU.Unimpeded Light ShowThe AX120 and RX120 fans feature up to 21 lighting effects. Simply push the LED button to swap between effects or sync with the motherboard to design your lighting effect style to enjoy the spectacular light party.Perfect Cable ManagementThe Montech SKY TWO Mid-Tower Casing incorporates a novel cable management design with a unique cable channel and three Velcro strips that make administration easier than ever throughout the building process, resulting in a clean-looking PC.Comprehensive Dust-Resistant DesignThe tailor-made dust-resistant top panel may be simply cleaned by removing the top panel. Removable dust filters are also installed on the input region adjacent to the motherboard and on the bottom to provide complete dust protection. The arrangement results in a pleasant user experience and a visually appealing PC.Easy Top 360 RadiatorThe Montech SKY TWO Mid-Tower Casing Users may easily install an AIO liquid cooler on the top owing to the offset arrangement, which is meant to eliminate interference from other components like the motherboard and RAM...
9,800৳ 10,000৳
Ex Tax:9,800৳
Montech SKY TWO ATX Mid-Tower CasingThe Montech SKY TWO Mid-Tower Casing is the second generation of the SKY series which is part of the high-end product range in the MONTECH family. SKY TWO has a brand-new configuration to match the goal of this series. Each aspect and the raw material is precisely picked to create a sumptuous experience for our users of our high-end product. The integrated front and side panels, the fine mesh that covers the entire bottom of the tower, and the high-efficiency pre-installed fans combine the usefulness and elegance that match up to our core value of design, while also satisfying all of the user's desires, whether for performance or appearance.Enjoy the Unobstructed ViewsThanks to the integrated front and side panels, users can see their whole interior at first sight. The fine mesh that covers the underside of the front panel extends to the PSU chamber with pre-installed ARGB fans that enhance the beauty of this masterpiece.Next Gen High-End SupportedThe Montech SKY TWO Mid-Tower Casing can handle GPUs with lengths up to 400mm, CPU cooler height support up to 168mm, 210mm high wattage PSU, and abundant room for assembly.Transformative Airflow DirectionThe Montech SKY TWO Mid-Tower Casing incorporates an entirely new airflow design. Two pre-installed fans with reversed fan blades for air intake on the side panel and an exhaust fan on the rear, as well as another reversed fan on the PSU chamber that directly cools the GPU. MONTECH eventually designed a new airflow system to optimize airflow after years of testing.4 High-Performance ARGB PWM FansThe Montech SKY TWO Mid-Tower Casing incorporates RX120 ARGB PWM with the reversed fan blade particularly created for air intake from the side position and the PSU shroud without losing aesthetics. The enlarged drillings that cover the underside of the front panel to the PSU chamber increase airflow intake, and the inverted fans on the PSU chamber can efficiently suck air in to cool off the GPU.Unimpeded Light ShowThe AX120 and RX120 fans feature up to 21 lighting effects. Simply push the LED button to swap between effects or sync with the motherboard to design your lighting effect style to enjoy the spectacular light party.Perfect Cable ManagementThe Montech SKY TWO Mid-Tower Casing incorporates a novel cable management design with a unique cable channel and three Velcro strips that make administration easier than ever throughout the building process, resulting in a clean-looking PC.Comprehensive Dust-Resistant DesignThe tailor-made dust-resistant top panel may be simply cleaned by removing the top panel. Removable dust filters are also installed on the input region adjacent to the motherboard and on the bottom to provide complete dust protection. The arrangement results in a pleasant user experience and a visually appealing PC.Easy Top 360 RadiatorThe Montech SKY TWO Mid-Tower Casing Users may easily install an AIO liquid cooler on the top owing to the offset arrangement, which is meant to eliminate interference from other components like the motherboard and RAM...
9,700৳ 10,000৳
Ex Tax:9,700৳
Montech AIR 100 ARGB Micro ATX Black Gaming Case Ultimate Cooling Performance With Ultra Minimalist DesignFinally, a Micro-ATX with Great CoolingThe AIR 100 series is the first Micro-ATX case from Montech's acclaimed AIR Series PC cases. Its smaller footprint makes easy to carry and takes much less space. Despite its smaller form factor the AIR 100 cuts no corners to achieve the best cooling capacity capable. Expandability and anti-dust features also adhere to Montech's AIR Series standard. Combining this all with a clean minimalist design, the AIR 100 provides PC users a smooth and classy but also high performance build experience.Dust Resistant & Airflow Optimized Front PanelThe Super Fine Mesh Face Plate not only provides unobstructed cool airflow into the case, it also acts as an anti-dust cover. With its smart quick release design, removing the Super Fine Mesh for cleaning is simple and tool free. Ultra-Minimalist DesignThe cleverly designed top cover design and the Super Fine Mesh Face Plate molds into one unified clean minimalist style language.ARGB Lighting Show Right Out of The BoxFour pre-installed 120mm ARGB fans are connected by the included lighting controller, that can be easily controlled by the LED button on the case or managed through motherboard ARGB software. Note: "All the included fans are 3pin DC fan, not molex fan."More Convenient & More SafeThe unique Side Swivel Tempered Glass Side Panel design is not only easier for users to unmount, its zero drill-hole design drastically improves the panel's strength integrity and safety.Enjoy building your PCAlthough a class smaller in volume, nothing is sacrificed in terms of expandability. The AIR 100 ARGB supports GPU cards up to 330mm, 160mm PSUs and tower heatsinks up to 161mm. 280mm radiators can be mounted at the front, while at the top there's space for 240mm radiators. The AIR 100 Lite is expansion capable for years to come.Smart Cable ManagementWith cable management in-mind, the AIR 100 ARGB has strategically pre-installed cable loops and Velcro straps. This makes building your system with good clean cable management a breeze.Easy Accessible I/O PortsTwo high-speed USB 3.0, a USB 2.0 and the HD Audio ports are all located on the top of the case for easy accessibilityTotal Dust ProtectionThe fine mesh front panel acts as an anti-dust cover, alone with top and bottom dust filters to prevent any dust infiltration.Drive Bays 3.5" HDD or 2.5" SSD*2 2.5" SSD*5Clearance PSU Length~160mm CPU Cooler Height~161mm VGA Card Length~330mm..
6,200৳ 6,500৳
Ex Tax:6,200৳
MaxGreen MGK11 ATX Mid Tower CasingMaxGreen MGK11 is a budget friendly ATX Mid Tower Casing. It has a TOP/ATX PSU Form Factor with a tinted acrylic glass side panel.The front panel is made of ABS material and on both side panels, there are metal covers. Side cooling air hole structure ensures smooth air circulation to maintain optimum internal temperature. the casing Case color is Black and the side window is tinted acrylic glass window. The casing has a total of 7 Expansion Slots and it supports ATX, Micro-ATX, ITX and Mini ITX motherboard. The number of Hard Drive bay can hold two 3.5HDD or three 2.5SSD. The maximum Supported Graphics card length is 345mm while the maximum CPU height supported is 165mm. It has a built in Power supply included. the PSU is a MG-P500W ATX PSU Unit located at the upside of the casing. For I/O port this casing has two USB2.0 and one USB3.0, alongside a 3.5mm HD Audio port and a Microphone port. The front side also has the power and the restart button. This casin does not come with any pre-installed fan but supports additional space for installing Cooling system. ..
3,500৳ 4,000৳
Ex Tax:3,500৳
MaxGreen A361 RGB CaseMaxGreen A361 RGB Case is equipped with front and side tempered-glass panels, the A361 RGB Mid Tower Case features a front addressable RGB light strip and pre-installed addressable RGB fans for showing off your build, while a pair of front air intakes help to optimize airflow. Designed for motherboards, the case comes with two 3.5 inch and two 2.5 inch drive bays, along with room for front, top, and rear radiators. A magnet-mounted dust filter in the top is designed for easy removal and cleaning.MaxGreen A361 Features:ATX X3 Chassis with Black Material Inner and 0.5mm thicknessFull Black with ARGB Strip Front PanelTempered Glass on the Left Side with VGA HolderHD Audio PortUSB 3.0 and 2.0 PortFN-Rainbow-M Fan..
3,250৳ 3,250৳
Ex Tax:3,250৳
MaxGreen 5907BG Casing with PSUATX 1059 chassis with SGCC material;0.4mm thicknedss 2 USB2.0+HD audio and micFront panel : black and green ,body: black1*12cm black fan on the rear panel Power supply real 200W, with 2sata ,8cm fan ,220V,1.2 M power cord ,remark 500W with normal brown box ..
2,450৳ 2,500৳
Ex Tax:2,450৳
MaxGreen 5905BK ATX CasingATX 1059 chassis with SGCC material; 0.4mm thickness 2 USB2.0+HD audio and micFront panel: full black, body: black1 x 12cm black fan on the rear panel Power supply real 200W, with 2sata, 8cm fan,220V,1.2 M power cord, remark 500W with a normal brown box PSU included..
2,450৳ 2,500৳
Ex Tax:2,450৳
MaxGreen 2810BR ATX Casing with PSUThe MaxGreen 2810BR is an ATX 1028 chassis with SGCC material; 0.4mm thickness casing. Its front panel color is black & grey. The whole body colour is black.it has 2 USB 2.0 port and HD audio with mic port. 1*8cm black fan is pre-installed on the rear panel. Max 2 fan are supported in this casing. It also has real power supply real 200W, with 2sata, 8cm fan, 220V, 1.2 M power cord. The MaxGreen 2810BR comes with no warranty. Buy this MaxGreen ATX Casing at best price in Bangladesh from our online store...
2,350৳ 2,400৳
Ex Tax:2,350৳
MaxGreen 2810BG ATX Casing with PSUMaxGreen 2810BG is an ATX 1028 chassis with SGCC material; 0.4mm thickness casing. Its front panel colour is black & grey. The whole body colour is black. This case has 2 USB 2.0 port and HD audio with mic port. 1*8cm black fan is pre-installed on the rear panel. Maximum 2 fan can be installed in this casing. It also has real power supply of 200Wats, it is featured with 2sata, 8cm fan, 220V, 1.2 M power cord...
2,350৳ 2,400৳
Ex Tax:2,350৳
Lian Li O11DW O11 Dynamic ATX Mid Tower Gaming Case (White)Front: Tempered Glass+AluminumSide: Tempered GlassM/B Type: EATX, ATX, MicroATXThe O11 DYNAMIC is the combination of modern design and art. Through years of researching, collecting feedback and redesigning; We have successfully craft the best edition of the dual chamber chassis. Display your hardware like Modern Architecture Experience the full view seamless front and side tempered glasses like a show room USB3.1 Type-C, Test the limit of transferring Speed Type-C(USB 3.1) 1280MB/S Patented Designed Glass Mounting Mechanism The two bolt on the steel pieces adhering on the glass secure the panel with ease The potential of housing Multiple Radiators Top/Bottom/Side can be mounted for up to three 360 Radiators without interference Dual PSUs Capability for efficiency The drive caddy can be swapped for second PSUs or can be switched to the lower position. The Combination of the glass and aluminum, Wide front glass combines with brush aluminum in proper proportion Double Layer Cable Management Design The angled motherboard tray and the back side cable management bar seal the and exclude any cable mess 6 Hard Drive Capability Support up to 6 SSD, and 3 HDD 4 x Dust Filter, Complete Dust Protection Bottom/top/ Side panels are all equipped with magnetic dust filters to prevent any dust infiltration 0.8mm SECC, Sturdy Build Construction The Chassis’ body Structure is made out of 0.8mm thick SECC, Offer Sturdy and Strong Foundation.German Engineering ApprovedThe O11 Dynamic series from LIAN LI is developed in collaboration with DER8AUR, a world-renowned German overclocking, water cooling, and gaming evangelist. Always looking for ways to improve computer design and performance, DER8AUER volunteered his time to review and test the design concepts of the O11D series.Starting with the first O11 Dynamic and up until the most recent models of the O11D series, LIAN LI appreciates the input from DER8AUER which helped make the O11D series exceptional cases, especially in terms of custom water cooling compatibility, ease of build, and features offered. As a result, DER8AUER’s seal of approval is elegantly displayed beside the LIAN LI logo, standing as a statement of quality and reliability.Lian Li O11DW O11 Dynamic Case Type: ATX Mid Tower Color: White Material: Front: Tempered Glass+Aluminum Side: Tempered Glass Body: 0.8mm SECC M/B Type: EATX, ATX, MicroATX Drive Bays: 6 Internal: 2x 3.5" HDD, 4x 2.5" SSD Expansion Slots: 8 Cooling System: Top: 3x 120mm or 2x 140mm Fan Vents (Fans not included) Side: 3x 120mm Fan Vents (Fans not included) Bottom: 3x 120mm Fan Vents (Fans not included) Radiator Support: 120x 360mm or 120x 240mm or 140x 280mm Side Windows: Yes Front I/O Panel: 1x USB3.1 Type-C Port, 2x USB 3.0 Ports, HD Audio Maximum Compatibility: Maximum VGA Card Length: 420 mm Maximum VGA Card Height: 159 mm Maximum CPU Cooler Height: 155 mm Power Supply: N/A Dimensions (WxDxH): 272.0 x 445.0 x 446.0 mm...
14,400৳
Ex Tax:14,400৳
Fantech AERO CG80 Mid Tower ATX Gaming Case WhiteAERO CG80 SPACE EDITION RGB MIDDLE TOWER CASE Side Tempered Glass Add Up To 8x120mm Fan Compability: Atx/Mini-itx/Micro-atx Include 4pcs Rainbow LED Fan.【Inner Structure】: AERO CG80 supports ATX, Mini ATX, Micro ATX motherboards, 3 x SSD and 2 x HDD installation locations. Fan compatibility: 3 x 120mm front fan, 1 x 120mm rear fan, 2 x 120mm top fan【Tempered Glass Side Panel】: An edge-to-edge Tempered glass Side panel transparent window showcases your PC's components and RGB lighting【4 x Fixed RGB Fan included】: 3 x front and 1x rear 120mm Fixed Colour RGB LED cooling fan pre-installed, the colour of fans is fixed and cannot be chganged.【Top I/O panel & Dust Filter】: 1 x USB3. 0 port, 2 x USB2. 0 port, 1 x HD Audio, 1 x power 1 x reset and 1 x LED Mode. The button on the top-front panel to grant direct access when needed. Dust filters on top and bottom can effectively prevent dust from entering the computer case【Dimension & Support】: Case dimension is Length- 415mm, Width- 210mm, Height- 445mm, and Support VGA Length Max-280mm, CPU Height Max-160mmFEATURES- USB 3.0- 2x USB 2.0- MIC & Audio- Power Warehouse- Support Up to 6x Fan (4 pcs fans included)- Tempered Glass- Support ATX, MINI-ITX, MACRO-ATX motherboards, 3 SSD and 2 HDD- 210mm x 445mm x 415mm- 3 Color Selection ( Black, Pink, and White)..
5,400৳ 6,300৳
Ex Tax:5,400৳
DeepCool CK560 Mid-Tower E-ATX Gaming CaseThe DeepCool CK560 Mid-Tower E-ATX Gaming Case which available in black and white, all cases deliver a balance of airflow, silent performance, and exceptional cooling for the modern-day builder. The CK SERIES deliver a no-nonsense approach to a clean, sleek computer chassis design. For Minimalist Builders who appreciate the CK500 and CK500WH minimal solid front panel can be rest assured that airflow performance is not hindered thanks to enlarged ventilation outlets throughout the front, top, and rear panels for additional air movement. For Builders that insist for even more airflow, the CK560 and CK560WH feature a unique cross-hair patterned steel front panel. All cases offer a clean aesthetic and fits a modern-day look while being feature-packed for additional hardware expansion and upgrades.Exceptional Cooling with Optimized Thermal ManagementThe CK560s carry a total of four pre-installed fans to help enhance cooling performance, with the front three ARGB fans illuminating your system build. It’s also conformed to builders who appreciate airflow designs as a unique cross-hair patterned steel front panel.Wide, Spacious Interior With Support In All The Right PlacesThe CK SERIES Mid-Tower Cases supports up to E-ATX motherboards and a large CPU cooler height up to 175 mm and GPU lengths up to 380 mm. Cooling capacity is optimized on the CK SERIES, with up to 6x 120 mm or 5x 140 mm cooling fans and support for AIO radiators up to 280/360 mm through the front panel and 240/280 mm on the top panel. An Anti-Sag / Adjustable GPU Support Bracket allows it to be positioned in two different locations accordingly for various sized graphics cards.The Rest Of The AmenitiesThe CK SERIES Cases offer easy access on the front panel with a simple quick-release that reveals a dust filter tray. Both side panels offer captive thumbscrews with a slide and lock mechanism. Tool-Free storage capacity ensures the user can install up to 2x 2.5” SSDs directly onto the backplate with an efficient push-pin mount and 2x 3.5” HDDs underneath in tool-free drive cage trays for ample and discreet storage tucked away. Front I/0 includes: 2x USB 3.0 Type-A, 1x USB 3.1 Type-C, 1x Combo Audio Mic Jack...
8,250৳ 9,000৳
Ex Tax:8,250৳
DeepCool CC560 WH Mid-Tower ATX Gaming CaseThe DeepCool CK500 WH Mid-Tower Case is a sleek and minimal white case that delivers balanced airflow and noise performance for the modern-day builder with two pre-installed 140mm performance fans.QUICK-RELEASE SOLID FRONT PANELSleek curved edges offer a premium look and feel in a minimalistic design while still featuring large ventilation for more airflow. The solid steel panel adopts an easy quick-release magnetic connection.WIDE AND SPACIOUS INTERIORMaximize potential with flexible configurations that meet the needs of any system setup. With space for large GPUs up to 380mm and CPU coolers up to 175mm in height, the CK500 WH provides ample space without being too bulky.BIG AIR COOLINGTwo pre-installed DeepCool 140mmairflow-focused fans help concentrate cooling performance for lower temperatures and noise levels.CHOOSE YOUR COOLING CONFIGURATIONThe CK500 WH has great cooling capacity with up to 6x 120mm or 5x 140mm cooling fans and liquid cooling support for 280/360mm radiators through the front panel and 280/240mm radiators on the top panel.CONVENIENT STORAGE OPTIONSInstall up to 2x 2.5in storage drives directly onto the motherboard tray with quick-release push-pins and 2x 3.5in HDDs on a tool-less tray design for extra simplicity.MODERN FRONT I/OFeatures two USB 3.0 ports, a single USB 3.1 Type-C port, and a combination audio jack for the most important connections up close...
7,250৳ 8,000৳
Ex Tax:7,250৳
Model: CG560Motherboard Support: Mini-ITX, Micro-ATX, ATX, E-ATXPre-Installed Fans: Front 3×120mm Rear 1×140mmMaterials: ABS+SPCC+Tempered GlassExpansion Slots: 7 SlotsDeepCool CG560 Mid-Tower ATX Gaming Case The DeepCool CG560 is a type of gaming chassis aimed at providing a good mix of functionality while focusing on airflow with its three ARGB fans in the front. This CG560 Mid Tower gaming case aims for a fair bit of value, coming equipped with three 120 mm aRGB fans and one 140 mm exhaust fan, plus the requisite glass side panel. DeepCool CG560 gaming case is ready for delivering mostly familiar features, like stated motherboard support up to E-ATX, SSD mounting points, a hard drive cage underneath the PSU shroud and a lot of cooling options. This DeepCool CG560 comes with three RGB-lit fans on its perforated front, plus a 140 mm exhaust spinner, the CG560 deserves a spot on our Best Desktop PC Cases category. Even though the CG560 isn’t the biggest gaming casing, it’s roomy inside, especially when it comes to fan options. The front of the case can support up to three 120 mm or two 140 mm spinners. Two 120 mm or two 140 mm fans can live up top and one 120 mm or 140 mm fan fits in the rear. DeepCool CG560 is best known for cooling for sure, and with support for vertical cooling clearance up to 175 mm (6.89 inches). The CG560’s seven expansion slots means you will be able to comfortably install your EVGA RTX 2080 TI XC Ultra graphics card without any issue, Thanks to the CG560 gaming case that supports GPUs up to 15.7 inches long), and you can also install much more in the other slots. The DeepCool CG560 is special when it comes to cable management, you won’t find any built-in cable routing lanes, but that’s fine. The CG560 instead just has a ton of cable tie points and rubber grommets to keep things looking clean, and lots of room behind the motherboard area...
6,400৳ 7,100৳
Ex Tax:6,400৳
Antec NX291 Mid Tower RGB Gaming CaseThe NX291 mid-tower gaming case effortlessly combines a bevy of in-demand features: USB 3.0 connectivity, ample storage drive bays, room for expansion, and includes 3 x 120mm fixed mode RGB fans in front and 1 x 120mm fan in rear. With support for up to a 360 mm liquid cooling radiator in front, NX291 is easy to build with and easy to cool...
3,500৳ 3,800৳
Ex Tax:3,500৳
Antec NX290 Mid Tower RGB Gaming CaseThe NX290 mid-tower gaming case effortlessly combines a bevy of in-demand features: USB 3.0 connectivity, ample storage drive bays, room for expansion, and includes 3 x 120mm fixed mode RGB fans in front and 1 x 120mm fan in rear. With support for up to a 360 mm liquid cooling radiator in front, NX290 is easy to build with and easy to cool...
3,500৳ 3,550৳
Ex Tax:3,500৳
Antec NX260 Mid Tower ARGB Gaming CaseThe Antec NX260 Mid Tower Gaming Case comes with a bevy of in-demand features, It comes with USB 3.0 connectivity. NX260 is easy to build with and easy to cool with the support for up to a 360 mm liquid cooling radiator in front,I/O Ports:This Antec NX260 Mid Tower Gaming Case supports ATX, Micro-ATX,ITX motherboards, and is featured with Mid Tower Form Factor, Power, LED Control Button, 1 x USB3.0, 2 x USB2.0, HD-AUDIO Front Access & Controls, Tempered Glass Side Panel.LED Control ButtonThis Antec NX260 Mid Tower Gaming Case comes LED Control Button, that helps to change the front panel’s ARGB lighting effect at will.Supports up to 8 fansHere, 3 x 120mm ARGB fans in front are Included Fan and also supports 3 x 120mm/2 x 140mm Fan in the Front, 2 x 120mm Fan in Top panel, 1 x 120mm in Rear and 2 x 120mm PSU Shroud. This gaming case has Dust Filter in Top/ Bottom. The latest Antec NX260 Mid Tower Gaming Case has no warranty...
4,000৳ 4,050৳
Ex Tax:4,000৳
Antec NX240 Mid Tower Gaming CaseThe Antec NX240 Mid Ttower Gaming Case effortlessly combines with a bevy of in-demand features, like - USB 3.0 connectivity, ample storage drive bays, room for expansion, and includes four ARGB LED fans in both front and rear. This case comes with support for up to a 240 mm liquid cooling radiator in front, NX240 is easy to build with and easy to cool. This caseing has LED Control Button, just a single press to change the front panel’s ARGB lighting effect at will and also supports up to 8 fans. This latest Antec NX240 Mid Ttower Gaming Case has no warranty...
4,000৳ 4,250৳
Ex Tax:4,000৳